Vinay Associates Distributors Private Limited

Series ASP is a speed controller with an integrated pilot check valve. This combination makes it possible to control cylinder speeds and permits temporary intermediate stops. The ASP is standard with electroless nickel plating on all brass parts and allows 360 degree freedom for tube mounting direction.

• Pilot check operates with 50% of operating pressure
• One-touch connection for supply air only
• Available in 6-10mm and 1/4"-1/2" tube sizes
• Universal style connection standard
• Thread sealant is standard
• Available in PT, NPT, and G thread (standard)

Series IR Precision Regulators are designed to be compact and light weight. The maximum set pressure has been expanded from the conventional 0.7MPa to 0.8MPa. Relief flow has been increased by nearly 5 times (compared to SMC IR201, IR401). The optional bracket and pressure gauge can be mounted on either the front or back of the unit.

• Precision regulator
• Regulating pressure range (MPa): 0.005 to 0.8 depending on model
• Compact and lightweight
• Bracket and pressure gauge can be mouted on either the front or back
• 2 air operated models

Series AF modular style air filter is a cost effective, clean looking solution to your filtration needs. Its' modular design allows connection with other SMC air preparation equipment. The series is available in six size options with a wide range of accessories.

• Modular air filter
• Prevents contamination
• Lighter weight than old style modular AF
• Thickness reduction of resin case provides increased capacity
  (approx. 1.3 times more).
• Improved water separation efficiency extends the service life of
  filter elements
• Rc, NPT or G(PF) type threads

Series ASD, combines a meter-in and meter-out dual speed controller in a single body. The series is available with PT or NPT ports and one-touch fittings are standard. Tamper proof and flat head screwdriver adjustable versions are also available for extra protection against inadvertent operation.

• Dual speed controller with one-touch fitting
• Enables bi-directional flow control
• Unrestricted 360 tube mounting direction
• Meter-in and meter-out types easily determined
  by the flow direction symbol on the resin body
• Reduces piping man hours and saves space

The specialty regulator series VBA is a booster regulator that saves money and energy by increasing the main line pressure up to two times. The booster regulator, when connected to air supply line, increases pressure up to two times and the main air supply pressure may be set low. Desired pressure increase can be easily adjusted.

• Boosts local line pressure without requiring additional power
• 2 to 4 times increase in pressure
• Easy adjustment of output pressure
• Improved performance over previous designs

• It is a fact that air contains moisture
• Regardless of the scale of the issue, there will be a cost impact for you:
  • Malfunctioning in the operation of air pneumatic systems, solenoid valves or air motors
  • Inefficiency of the components and a reduction in their life span
  • Water could spoil your final product.

Which translates into:

• Higher maintenance costs
• Production breakdowns
• Lower quality or even total wastage of the final

Thanks for the IDFA, Air-Refrigerated Dryer, your compressed air will be moisture free. We have 13 available sizes and can be used in the main line or before any critical applications in order to guarantee efficiency for your system and suitability for your application.

The MB series medium duty tie rod cylinder offers an improved design that enhances cylinder operation and ease of use. The standard air cushion utilizes a floating cushion seal to eliminate piston rod bouncing. The cushion volume has been elevated permitting about 30% more allowable kinetic energy absorption. The port and captive cushion adjustment valve are located on the same side of cap for heightened access. The MB series is available with many standard options, which include stroke adjustment, tandem, high/low temperature seals, heavy rod scraper, non-rotating rod, double rod and many more.

• Standard: double acting single rod
• Bore sizes: 32, 40, 50, 63, 80, 100, 125 *
• Strokes from 25mm through 1500mm depending upon bore size
• Mounts: basic, foot, front and rear flange, single or double clevis, and center trunnion
• With or without rod boot
• Variety of switches and a variety of lead wire lengths

S coupler series KK employs a unique connection method. A slim body design and large effective area are achieved with a construction that does not use steel balls or valve springs and therefore does not restrict the flow path. Together with a reduction of the body size, pressing parts and resin parts are used to achieve an overall weight reduction.

• S coupler series, general purpose type
• With sleeve lock mechanism (Except KK2)
• Effective area: 3.8 to 82mm²
• Weight: 6.1 to 87.7g
• Fluids: air and water

• Improved tube insertion/removal
• Compact and lightweight
• Body type: totaled 51 models
• Seal method: 2 types
• Thread material/Surface treatment: 2 types*
• Variations